U-SEAL™ Concrete Countertop Sealer (2-Part System)

---

A Concrete Sealer That Won’t Peel, Cloud, or Fail in Kitchens

• Natural matte finish (no plastic look)
• Food safe after full cure
• Designed for countertops, GFRC & precast
• Excellent stain, water, and wear resistance

---

Why U-SEAL is Different

Most concrete sealers either look good or perform well—rarely both.

U-SEAL combines urethane durability (for strength and chemical resistance) with acrylic workability (for easier application and repairability).

The result is a sealer that bonds well to concrete, resists staining and daily wear, and maintains a natural, low-sheen appearance without the heavy, artificial look.

---

Quick Specs (At a Glance)

• Mix Ratio: 3:1 (Part A : Part B)
• Pot Life: Approximately 2 hours
• Initial Cure: Approximately 24 hours
• Full Cure: 5–7 days
• Coverage: Approximately 400–600 sq. ft. per gallon
• Heat Resistance: Up to approximately 350°F
• Finish: Matte to satin

---

Cold Weather Shipping Notice

DO NOT SELECT GROUND SHIPPING IN WINTER

• Product must be protected from freezing
• Overnight shipping required in cold temperatures
• Ideal storage and application temperature: 40°F–90°F

---

A Concrete Sealer Built for Real-World Performance

U-SEAL™ is a high-performance, two-component hybrid urethane/acrylic sealer engineered specifically for concrete countertops and decorative concrete surfaces.

It delivers a natural matte finish, strong stain resistance, and long-term durability without the plasticky look of heavy coatings.

---

Key Benefits

• Natural matte finish
• Enhances concrete appearance
• High durability for countertops and high-use surfaces
• Chemical and stain resistant
• UV stable for interior and exterior applications
• Water-based and low VOC compliant
• Easy to repair and recoat
• Fast recoat time

---

Application Overview

For best results:

1. Apply a saturation/primer coat
2. Follow with multiple thin coats
3. Typically apply 4–5 total coats for optimal durability

Thin, controlled applications are key to avoiding bubbles and achieving a consistent, professional finish.

Click Here to download the complete application and usage guide

---

Where U-SEAL Works Best

• Concrete countertops
• GFRC and precast concrete
• Decorative concrete surfaces
• Interior and exterior applications

---

Important Notes

• Do not apply below 45°F
• Protect from freezing during shipping and storage
• Apply only to clean, dry, properly prepared surfaces
• Always test compatibility when applying over existing coatings

---

The Bottom Line

If you’re looking for a concrete sealer that won’t peel, cloud, or fail under real use, U-SEAL is built to deliver:

• Durable, long-lasting protection
• A natural matte appearance
• Reliable performance in real-world conditions

---

Frequently Asked Questions

---

Is U-SEAL food safe?
Yes. U-SEAL is food safe after full cure (typically 5–7 days) and will not break down into harmful compounds when used properly.

---

What finish does U-SEAL leave?
U-SEAL provides a natural matte to satin finish depending on application technique and number of coats. It enhances the concrete without creating a thick, plastic-like appearance.

---

Will U-SEAL darken my concrete?
U-SEAL is enhancing, meaning it will slightly deepen the color of the concrete—similar to how the surface looks when wet—but without excessive darkening.

---

How durable is U-SEAL for kitchen countertops?
U-SEAL is designed specifically for high-use surfaces like countertops. It offers excellent resistance to water, oils, common food exposures, and daily wear.

---

How long does it take to cure?
Initial cure is approximately 24 hours for light use. Full cure is typically achieved in 5–7 days. Avoid heavy use, standing water, and harsh cleaners until fully cured.

---

How many coats should I apply?
For best performance, begin with a saturation/primer coat followed by multiple thin coats. Typically, 4–5 total coats provide optimal durability and stain resistance.

---

What is the coverage rate?
Coverage depends on the porosity of the concrete, but generally averages 400–600 square feet per gallon. Avoid over-application, which can lead to bubbling or surface defects.

---

What is the mix ratio?
U-SEAL is a two-part system mixed at a 3:1 ratio (Part A to Part B). Once mixed, the pot life is approximately 2 hours. Do not use beyond this window.

---

Can U-SEAL be used outdoors?
Yes. U-SEAL is UV stable and suitable for both interior and exterior applications.

---

Is U-SEAL heat resistant?
Yes. U-SEAL can withstand temperatures up to approximately 350°F, making it suitable for most kitchen applications.

---

Can I repair or recoat U-SEAL later?
Yes. U-SEAL is easy to repair and recoat. Light sanding and proper preparation allow for seamless touch-ups.

---

What temperature should I apply U-SEAL in?
Ideal application temperature is between 40°F and 90°F. Do not apply below 45°F and protect from freezing.

---

Can I apply U-SEAL over an existing sealer?
It depends. U-SEAL may be compatible with some water-based systems, but testing is recommended. For best results, apply to properly prepared, bare concrete.

---

Why do concrete sealers fail, and how is U-SEAL different?
Most sealers fail due to poor bonding, moisture issues, or weak coatings. U-SEAL uses a hybrid acrylic/urethane system to improve adhesion, flexibility, and durability.

---

What happens if I apply it too thick?
Over-application can cause bubbling, foaming, or uneven finish. Always apply thin coats.

---

Do I need ventilation when applying?
Yes. Proper ventilation is recommended during application, even though U-SEAL is water-based and low VOC.

---

Need Help With Your Project?

We work with concrete every day. Whether you’re a DIYer or professional fabricator, we’re here to help.

Contact us for product support and application guidance.

Click Here to download the complete application and usage guide